HAYMAN REESE 3500KG X-BAR TOWBAR KIT FOR ISUZU D-MAX & MAZDA BT-50 CAB CHASSIS 03365XW

Save 16%
Hayman ReeseSKU: 03365XW

Price:
Sale price$1,675.00 Regular price$2,000.00

Description

This Hayman Reese Towbar is designed to suit the Isuzu D-Max TF Cab Chassis 07/2020 On and Mazda BT-50 Cab Chassis 07/2020 On 

This Towbar is rated to a capacity of 3500kgs with a ball weight capacity of 350kgs.

X-Bar by Hayman Reese

X-Bar. Built for tough off-road action.

Maximum Clearance

The Hayman Reese X-Bar sits higher on the vehicle, up to 100 mm vertically, offering improved departure angles of 5 degrees compared with some OEM and other aftermarket towbars.

Recovery Rated

The X-Bar provides a purpose designed and rated rear vehicle recovery system encompassed in a fully Australian Design Rules (ADR) compliant towbar and is rated to 8, 000 kg

Superior Strength

The Hayman Reese X-Bar features increased thickness side arms for better rigidity, custom forged 700-grade steel recovery points,  and high-tensile Australian Standard Grade 10.9 fasteners. 

Additional Features

  • Twin protected trailer socket mount points (7 or 12 pin flat & Anderson plug)
  • Full ADR compliance, allowing for a 50mm height increase from suspension or tyre upgrades
  • SmartPin hitch pin with integrated anti-rattle feature
  • Maximum vehicle towing capacity across all fitments
  • Comes complete with:
    • Flat sided superior finish tow ball
    • Rated D shackles
    • Metalshield, Hayman Reese’s premium eCoat & powder-coat finish
    • Hayman Reese Limited Lifetime Warranty
    • Tested to Australian Standards AS/4177 and ADR 62/02 in a NATA accredited laboratory
    • Tested to industry standards for Static Overload, Durability and Recovery Overload.
    • Hayman Reese X-Bar Towbar (Class 4 Wired)
Hayman Reese X-Bar Towbar (Class 4 Wired)
Suits Isuzu D-Max TF Cab Chassis 07/2020 On and Mazda BT-50 Cab Chassis 07/2020 On
Bumper Cut Required: No
Exposed fittment
Load Rating Towbar: 3,500kg
Ball Weight Rating: 350kg
Lug No. 21359

Fitment of this Towbar allows / needs removal of plastic rear bumper (Standard on all Cab Chassis variants)
and will require vehicle Blindspot / Cross traffic sensors to be relocated
Sensor Relocation Kit Part No. 08409 enables correct relocation of sensors when towbar fitted
For vehicles equipped with RPA, Part No. 04943 Normally Open Reed Switch tail is required to dissable

You may also like

Recently viewed